2007 Remington Bullet R1373 Renegade Folding Guard with Box and Papers

This is a beautiful 2007 Remington Bullet knife model number R1373, comes complete with original papers and box. This is a one-blade Renegade with beautiful jigged red handles and a folding guard. On the main blade, front side is the word “Remington”. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners and bolsters are made of non-rusting brass. There are no cracks at any of the pins on both sides. This is a lockback, the front side of this knife has the Remington Bullet Shield. The blade sits deep and well centered. This knife is 4 3/8 inches long when closed and 7 7/8 inches long when the main blade is fully opened. 

Italian 5 Blade Camp Knife Auto

This is beautiful Italian 5 blade auto. On the main blade, on the front side of the tang it says: Jaguer, Rostfrei. It has 3/16 Brazilian Horn Handles and Nickel Silver Bolsters and a large bail. On the end where the bail is located is a shot gun shell puller. Also includes a screwdriver and cap lifer, a saw, and a safety can opener. The blade sits deep and centered when closed. It fires strong when pushing the button. The sliding lock works in both positions. It has good snap and a tight lockup. There is no peeking or wobble when the blade is closed or open. This knife was originally sold from Crowley Knife Company in Minnesota.

2008 Remington Bullet Knife, The Veteran RB-473

This is a beautiful 2008 Remington Bullet Knife, The Veteran, Model RB473. It has beautiful Jigged Bone handles and is considered a Razor Barlow. The main blade is 2 1/2 inches long, the name Remington is etched on the front side of the blade. The smaller pen blade is 1 7/8 inches long and the year 2008 is stamped on the back side of the tang. Both blades sit deep and well centered when closed. The overall length of the knife is 3 1/2 inches. The blades are made of 440 Stainless Steel, with a long nail pull and traditional Remington etched the blade. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters are nickel silver.

2009 Remington Bullet Knife RB-1242 2 Blades Big Daddy Barlow

This is a beautiful 2009 Remington Bullet Knife folder, Model RB-1242 with 2 blades. It is called the Big Daddy Barlow. Both blades are made of 440 stainless steel for a superior, longer lasting razor sharp edge. The handles are made of genuine Saw Amber, no cracks, or chips. This knife is about 5 inches when closed and on the front bolster it has the Remington stamped. Both blades have hard snap and have never been sharpened. The Clip blade is the main blade and measures 4 inches long and has a long nail pull and the traditional Remington trademark etch on the blade. The back of the tang has the pattern number stamped while the front of the tang has the traditional Remington UMC Made in the USA stamp. The secondary blade is open blade that measures 2 1/2 inches long and has nail pull. Both blades are tempered to a Rockwell hardness of 56-59. The liners and the spring are made of non-rusting brass. Embedded in the handle is the legendary Bullet Shied.

2010 Remington Bullet Knife R-2253 2 Blades

This is a beautiful 2010 Remington Bullet Knife, R-2253 code name Double Strike. This year’s Bullet knife is a new pattern in the Bullet knife family. However, it is a very old European pattern called a Copperhead which has the same features as the popular trapper pattern. This year’s Bullet knife will prove to be highly collectable due to the unique pattern as well as new bone. The blades of the R-2253 consist of 440 high carbon stainless steel. The Clip blade is the main blade and measures 2 1/2 inches with a long nail pull and the traditional Remington trademark etch on the blade. The back of the tang has a pattern number stamped while the front of the tang has the traditional Remington UMC Made in the USA stamp. The secondary blade is a spey blade that measures 2 3/8 inches and has a long nail pull. Both blades are tempered to a Rockwell hardness of 56-59. The liners are made of quality brass and nickel silver bolsters. The handles bear a new jig pattern called “Tree Bark” and are dyed a rich mahogany for a classic look. This knife is manufactured and assembled by shilled American craftsman in the USA.

1997 Camillus & Remington Salutes NKCA Folder 2 Blades

This is a beautiful Remington Knife saluting the NKCA 1972-1997. The serial number is 0260. This knife has 2 blades made of 440 stainless steel. The main blade is 2 3/4 inches long with a nail pull and traditional Remington trademark etch on the blade and saluting the NKCA 1972 to 1997. On the front side of the tang it says Camillus, New York, USA. The back of the tang has nothing on it. The Spey blade is 2 3/4 stamped CCC-5 on the back side of the tang. On the front side of this knife is the NKCA Logo and on the back side is a gimp with the words Camillus. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Black Jigged Bone. 

2011 Remington Bullet Knife R1123L

This is a beautiful 2011 Remington Bullet Knife, model R-1123L. It has two blades and both are lock back. This knife is about 4 1/2 inches long when closed and about 8 inches when the main blade is opened. This knife is also called a Lock-Stock & Barrel and it has real jigged bone handles and nickel silver bolsters. Both blades sit deep and well centered.

2017 Remington Bullet Knife The Powderhorn 1 Blade SlipJoint

 This is a beautiful 2017 Remington Bullet Knife, the Powderhorn. The blade for the R-1613 is made of 440 stainless steel. The main blade has a nail  pull and traditional Remington trademark etch on the blade. The back of the tang has the pattern number R-1613 and the year 2017 stamped on it while the front of the tang has the traditional Remington UMC Made in the USA stamp. Tempered to a Rockwell hardness of 56-59. The handles are made of Genuine Chestnut Brown Sawcut Bone with nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A.

2016 Remington Bullet R-293B, The Boss, Two Blades, SlipJoint

This is a beautiful 2016 Remington Bullet Knife, model R-293B. The blades of this Bullet consists of 440 stainless steel. The main blade is 3 3/4 inch with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-293B while the front of the tang has the traditional Remington UMC Made in the USA stamp. The spey blade is 3 3/4 stamped 2016 on there back side of the tang. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Amber Jigged Bone. There are no cracks at any of the pins on either side, a well made knife. 

2015 Remington Bullet Knife The Cliffhanger with 2 Blades Model R-4466

This is a beautiful 2015 Remington Bullet Knife, a slip joint. The blades for the R-4466 knife are made of 440 stainless steel. Tempered to a Rockwell hardness of 56-59. The handles are made of Jigged Bone with nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife is about 3 3/4 inches long when closed and about 6 3/4 inches long when the main blade is fully opened. 

2014 Remington Bullet R-1173L LockBack

 This is a beautiful 2014 Remington Bullet Knife, model R-1173R. The blade of this Bullet consists of 440 stainless steel. The Clip blade is 2 3/4 inch with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-11173L and 2014 stamped on back of blade while the front of the tang has the traditional Remington UMC Made in the USA stamp. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Amber Saw Cut Bone.

2013 Remington Bullet Knife

This is a beautiful 2013 Remington Bullet Knife, Model R-1303 “The Forester” a LockBack. This knife is 4 1/2 inches long when closed and 8 inches long when the blade is fully opened. The blade is made of 440 Stainless Steel, with a nail pull and traditional Remington etched the blade. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters are nickel silver. The handles are made of Amber Bone saw cut.