This is a beautiful Remington Scout Bullet Shield Knife model R-3843 with six blades. It has Delrin handles and there are no cracks at any of the pins on either side. The cartridge shield is inset into the handle and includes a bail. This knife comes complete with original box and original Remington papers. This scout knife it is 3 5/8 inches long when closed and 6 1/4 inches long when the blade is fully opened.
This Remington Bullet knife is new in the box, comes complete with original papers and box. This knife has Cocobolo handles and nickel silver bolsters and liners. There are no cracks at any of the pins on both sides. Both blades sit deep and well centered. This knife is 3 ¾ inches long when closed and 9 inches long when both blades are fully opened.
This is a beautiful 1998 Remington Bullet Knife, model R-293. The blades of this Bullet Knife consists of 440 stainless steel. This is a slip Joint knife. The main blade is 4 1/4 inches long with a nail pull and traditional Remington UMC Made in the USA on the front side of the tang. The back of the tang has year 1998. The other blade is 4 1/4 inches long and stamped R-293 on the back side of the tang. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Jigged Delrin. There are no cracks at any of the pins on either side, a well made knife. This knife is manufactured and assembled by skilled American craftsmen right here in the USA.
This Remington Bullet knife, Model R-103, is new in the box, comes complete with original papers and box. The blades of this knife are made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass and the handles are made of Delrin imitation Bone. There are no cracks at any of the pins on both sides. Both blades sit deep and well centered. This knife is 3 1/2 inches long when closed and 6 1/4 inches long when the main blade is fully opened.
This is a beautiful Frank Centofante Lock Back Folder made in Tampa, FL. This knife is about 3 5/8 inches long when closed and about 6 1/2 inches long when the blade is opened. The blade is made of AST-34 stainless steel, a favorite of Frank. The bolsters are nickel silver and engraving by Bruce Shaw, a stunning example of a great folder by Centofante and engraving by Shaw. The handlers are Red Jigged, and there are no cracks at any of the pins on both sides. The knife has great walk and talk and the blade closes deep and well centered.
This is a beautiful 2000 Remington Bullet Knife, model R-1630. The blade of this Bullet Knife consists of 440 stainless steel. This is a knife is a lockback. The blade is 4 inches long with a nail pull and traditional Remington UMC Made in the USA on the front side of the tang. The back of the tang has the model R-1630 and the year, 2000. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Jigged Delrin. There are no cracks at any of the pins on either side, a well made knife. This knife is manufactured and assembled by skilled American craftsmen right here in the USA.
This is a beautiful 2001 Remington Bullet Knife, model R-1615T. The blade of this bullet consists of 440 stainless steel. The blade is 4 inches long with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-1615T and 2001 stamped on back of blade while the front of the tang has the traditional Remington UMC Made in the USA stamp. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Tortoise Shell Celluloid. There are no cracks at any of the pins on either side, a well made knife.
This is a beautiful 2002 Remington Bullet Knife, model R-295T. The two blades of this bullet consists of 440 stainless steel. The main blade is 3 1/2 inches long with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has year 2002 while the front of the tang has the traditional Remington UMC Made in the USA stamp. The second blade has the traditional Remington UMC Made in the USA Stamp and on the reverse of the tang is the Model Number R-295T. The blades are tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Tortoise Shell Celluloid. There are no cracks at any of the pins on either side, a well made knife.
This is a beautiful 2003 Remington Bullet Knife with 2 blades, a slip joint knife Model R-1178C. The blades of this knife are made of stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handles are made of Cocobola Wood. This knife was manufactured and assembled by skilled American craftsman right here in the USA. There are no crack at any of the pins on both sides. This knife is about 3 3/4 inches long when closed and about 6 3/8 inches when the main blade is opened.
This is a beautiful 2004 Remington Bullet Knife, Model R-103B, code name Old Reliable. The two blades of the R-103B are made of stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handles are made of Genuine Jig Bone. Like most Remington Cutlery, this knife was manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife a slip joint is about 3 3/8 inches long when closed and about 6 1/4 inches long when the main blade is fully opened.
This is a beautiful 2005 Remington Bullet Knife, the Maverick. The blades for the R-4353B are made of 440 stainless steel. The main blade has a nail pull and traditional Remington trademark etch on the blade. The back of the tang has the pattern number R-4353B, the second blade has the year 2005 stamped on it while the front of the tang has the traditional Remington UMC Made in the USA stamp. Tempered to a Rockwell hardness of 56-59. The handles are made of Genuine Jig Bone with nickel silver bolsters and the liners are made of non-rusting brass. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife a slip joint is about 4 1/4 inches long when closed and about 7 1/4 inches long when the main blade is fully opened.
This is a beautiful 2006 Remington Bullet knife model number R-1273B, comes complete with original papers and box. This is a two-blade Trail Bose with beautiful genuine Jig Bone Handle. On the main blade, front side is the word “Remington”. The main blade has a long pull. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners and bolsters are made of non-rusting brass. There are no cracks at any of the pins on both sides. This is a slip-joint, the front side of this knife has the Remington Bullet Shield. The blades sit deep and well centered. This knife is 5 1/48 inches long when closed and 9 1/2 inches long when the main blade is fully opened.
