1986 Remington Bullet Knife R-1263 Hunter with Pen Blade

This is a beautiful 1986 Remington Bullet Knife R-1263, a Hunter with a Pen Blade. This knife is about 5 3/8 inches long when closed and 9 1/2 inches long when the blade is opened. This knife has Delrin handles and there are no crack on either side. 

2019 Queen Cutlery Winchester Toothpick Folder Slipjoint

 This is a beautiful Queen Cutlery Winchester Model .270 Cartridge Series Toothpick. This is considered new old stock and was produced by Queen Cutlery in 1993. The blade, stainless steel, is a Clip and about 4 inches long. The knife is about 5 inches long when closed. The main blade has the original Cartridge Series Etching and the back of the blade is etched with IKC 2019. The front side of the tang says: Winchester, Trade Mark, Made in USA. The back side of the tang says: 19102, 1993. There is an inlay Bullet Shield on the front side of the knife with “Winchester” on the Bullet Shield. The bolsters are nickel silver and the liners are non-rusting brass. The handle material is Burnt Orange Bone with a Winchester Jigging.

2017 IKC Case 1 Blade Folder

 This is a beautiful Case pattern number 61048CV. The single blade knife is about 4 1/8 inches long when closed. The blade is Chrome Vanadium Carbon Steel, a clip blade. The handles are dark jigged bone with nickel silver bolsters and a shield that is inlayed. IKC 2017 is stamped on the blade.

2016 IKC Queen Cutlery 2 Blade Barlow with Ebony Handles SlipJoint

This is a beautiful Queen Cutlery 2 Blade Barlow with Ebony Handles. This knife was made for IKC. The blades are CMP154 stainless and the liners are made of non-rusting brass. The main blade is a spear point and its about 2 1/2 inches long. The Wharncliffe blade is about 2 1/4 inches long. This knife is about 3.5 inches long when closed and about 6 1/8 inches long when the main blade is opened. This knife is a slipjoint and it has half stops. On the main blade, on the front side of the tang it has: The Queen Logo, DFC, USA, D2. Comes completes with a Queen box and wrap. 

2015 IKC Queen Cutlery Barlow 2 Blades Folder SlipJoint

This is a beautiful 2015 IKC Queen Cutlery Barlow with 2 Blades. The steel is D2 with a Satin Finish. All the blades are flat grind, the main blade, a Spear is about 2 5/8 inches long and the smaller blade, a Wharncliffe, is about 2 1/4 inches long. On the front side of the tang, on the main blade, there is: A Queen Logo, DFC, USA, D2. On the front side of the bolster are the letters IKC. This knife is about 3 1/2 inches long when closed and about 6 1/8 inches long when the main blade is opened. This knife has half-stops and it’s a slipjoint. The bolsters are Nickel Silver with a deep IKC etch and the liners are also Nickel Silver. The handles on this knife are ebony, comes with an original Queen Black Box and wrap.

2014 IKC Colonel Coon 2 Blade Folder SlipJoint

This is a beautiful Colonel Coon, 2 Blade, Double End Bolsters made in 2014. This knife is about 3 1/2 inches long when closed and about 6 3/8 inches long when the main blade is opened. The 2 blades of the knife are 420 stainless steel. The liners are non-rusting brass and the bolsters are nickel silver. On one handle of this knife are the words: IKnife Collector 2014. On the front side of the tang it says: Col Coon USA. The same is on the back side of the smaller blade. Both blades have half stops and both center well when closed, with no peeking. This knife was made by Queen Cutlery and the handles are Harvest Orange Smooth Bone. Only 50 knives were made in 2014.

2013 IKC Queen Cutlery Mountain Man LockBlade

This is a beautiful Queen Mountain Man knife. The blade is 1095 Carbon Steel, with a Satin Finish. The handles are Amber Carved Stag Bone, and a distinct vintage shied. On the front of the blade is the iKnifeCollector etch. This knife is about 4 1/2 inches when closed and about 8 inches when the blade is opened. On the front side of the tang there is a Queen Company Logo. 

2012 IKC Great Eastern Cutlery 3 Blade Whittler

This is a beautiful Great Eastern Cutlery 3 Blade Whittler. The handles of this knife are Pioneer Jigged Bone, the liners are non-rusting brass and the bolsters are nickel silver. The bolsters on this knife are pinched ever so slightly. This knife is about 3 1/2 inches long when closed and about 5 7/8 inches long when the main blade is opened. This knife is a slipjoint, with the master blade falls between the smaller two blades when closed. The blade for this knife is 1095, a good Carbon Steel. On the front side of the master blade are the words: UNXLD, IKC, 2012. This was the annual knife for IKnife Collector. On the front side of the tang it says: Northfield unXld, Made in USA. On the small blade, on the back side of the tang it says: Titusville Iron Works. On the other small blade on the front side of the tang is the pattern number 570312. Comes with the original tube, wrap and certificate of authenticity.

2011 IKC Great Eastern Cutlery 1 Blade

 This is a beautiful Tidioute Cutlery with a lanyard hole. The pattern number is 722111. The blade is made of 1095 steel and it is a Spear Blade. The handles are Indian Choffee Jig Bone and they is a round shield with IKC in it. Along with the knife, is a Certificate of Authenticity. This knife is about 3 7/8 inches long and about 6 7/8 inches long when the blade is opened.

2010 IKC Jumbo Swellcenter Sunfish Knife

This is a beautiful 2010 IKC Club Knife, a Jumbo Swellcenter Sunfish Knife. The original Jumbo Swellcenter pattern was invented by C. Platts & Sons Cutlery Company, Eldred, PA. Now, 100 years later, A G Russell has reintroduced this popular pattern for the IKC community. The handle is 4 5/8 inches long and a little over 1 1/2 inches wide. The blade is AUS10 and it is 3 3/8 inches long and about 1/4 inch thick. It has a round silver medallion shield etched IKC 2010. The handle material is an exotic wood called Monkey Thorn, a member of the Acasia family. This knife was made in China and A G Russell is not going to produce this knife with Monkey Thorn in order to keep the club knife unique to IKC.

 

1987 Remington Bullet Knife R-1613 Fisherman Toothpick

This is a beautiful 1987 Remington Bullet Knife R-1613, a Fisherman Toothpick. This knife is about 5 inches long when closed and 8 7/8 inches long when the blade is opened. This knife has Delrin handles and there are no crack on either side. There is no box or paper with this knife, my uncle was not into saving boxes end papers. The reflections on the blade and bolsters are from my camera, they are not on the knife.

1988 Remington Round Bullet Knife R-1615 Fisherman

 This is a beautiful Remington Round Bullet Knife, Model R-1615. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handle is made of candy stripe celluloid. This knife was manufactured and assembled in the USA by skilled American craftsman. This knife, a slip joint, is about 5 inches long when closed and about 8 7/8 inches long when the blade is opened.

1989 Remington Bullet R1128 Knife Trapper with Box and Papers

This is a beautiful Remington Bullet knife model number R1128, comes complete with original papers and box. This is a two-blade Trapper with Cocobolo handles, has nickel silver bolsters and non-rusting brass liners. The blades are made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. There are no cracks at any of the pins on both sides or the thong hole. Both blades sit deep and well centered. This knife is 4 1/2 inches long when closed and 7 7/8 inches long when the main blade is fully opened.

1990 Remington Bullet Knife R-1306 1 Blade Lock Back

This is a beautiful 1990 Remington Bullet Knife. The blade for the R-1306 are made of 440 stainless steel. It is tempered to a Rockwell hardness of 56-59. The handles are made of beautiful Delrin Staghorn with non-rusting nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife is a Lock Back and is about 4.5 inches long when closed and about 7 3/4 inches long when the main blade is fully opened. 

 

1991 Remington Bullet Mini Trapper R-1178 2 Blades Slip Joint

This is a beautiful 1991 Remington Bullet Knife. The blades for the R-1178 are made of 440 stainless steel. Tempered to a Rockwell hardness of 56-59. The handles are made of beautiful Delrin Staghorn with non-rusting nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife is about 3.5 inches long when closed and about 6 3/8 inches long when the main blade is fully opened. This knife has half stop when open or closed. This Remington   has no cracks at the pins on both sides or the lanyard hole. Comes complete with a box and paper.

1992 Remington Bullet Knife R-1253 Guide with 1 Blade

This Remington Bullet knife is new in the box, comes complete with original paper and box. The blade of this Bullet consists of 440 stainless steel and tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The model number is R-1253. This knife is a LockBack and is a one blade with durable Delrin handles. There are no cracks at any of the pins on both sides. The blade sit deep and well centered. This knife is 5 3/8 inches long when closed and 9 1/2 inches long when the blade are fully opened.

 

1993 Remington Bullet Knife R-4356 Bush Pilot 2 Blades

This Remington Bullet knife is new in the box, comes complete with original paper and box. The blade of this Bullet consists of 440 stainless steel and tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The model number is R-4356. This is a two-blade Muskrat with simulated Stag handles. There are no cracks at any of the pins on both sides. Both blades sit deep and well centered. This knife is 4 ¼ inches long when closed and 10 ¼ inches long when both blades are fully opened.

1994 Remington Bullet Knife R-4243 Camp Folder

This Remington Bullet knife is new in the box, comes complete with original papers and box. The model number is R-4243. This is a four-blade Camp Knife with Delrin handles and nickel silver bolsters and liners. There are no cracks at any of the pins on both sides. All blades sit deep and well centered, comes with a large bail. This knife is 4 3/4 inches long when closed and 8 1/2 inches long when the main blade is fully opened.

1995 Remington Bullet Knife Master Guide Model R-1273

This Remington Bullet knife Master Guide Model R-1273 is new in the box, comes complete with original papers and box. This knife has durable Delrin handles and nickel silver bolsters and liners. The blades are made of 440 stainless steel, and tempered to a Rockwell hardness of 56 to 59. There are no cracks at any of the pins on both sides. Both blades sit deep. This knife is 5 3/8 inches long when closed and 9 1/2 inches long when the main blade is fully opened.

1996 Remington Scout Shield Model R-3843 Trail Hand 6 Blade Knife with Box

This is a beautiful Remington Scout Bullet knife model R-3843 with six blades. It has Delrin handles and there are no cracks at any of the pins on either side. The round shield is inset into the handle and includes a bail. This knife comes complete with original box and original Remington papers. This scout knife is 3 5/8 inches long when closed and 6 1/4 inches long when the blade is fully opened. 

1996 Remington Scout Bullet Shield Model R-3843 Trail Hand 6 Blade Knife

This is a beautiful Remington Scout Bullet Shield Knife model R-3843 with six blades. It has Delrin handles and there are no cracks at any of the pins on either side. The cartridge shield is inset into the handle and includes a bail. This knife comes complete with original box and original Remington papers. This scout knife it is 3 5/8 inches long when closed and 6 1/4 inches long when the blade is fully opened. 

 

1997 Remington Bullet Knife R4468 Lumber Jack with 2 Blades

This Remington Bullet knife is new in the box, comes complete with original papers and box. This knife has Cocobolo handles and nickel silver bolsters and liners. There are no cracks at any of the pins on both sides. Both blades sit deep and well centered. This knife is 3 ¾ inches long when closed and 9 inches long when both blades are fully opened. 

1998 Remington Bullet Knife R-293 Hunter-Trader-Trapper 2 Blades Slip Joint

This is a beautiful 1998 Remington Bullet Knife, model R-293. The blades of this Bullet Knife consists of 440 stainless steel. This is a slip Joint knife. The main blade is 4 1/4 inches long with a nail pull and traditional Remington UMC Made in the USA on the front side of the tang. The back of the tang has year 1998. The other blade is 4 1/4 inches long and stamped R-293 on the back side of the tang. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Jigged Delrin. There are no cracks at any of the pins on either side, a well made knife. This knife is manufactured and assembled by skilled American craftsmen right here in the USA.

1999 Remington Bullet Ranch Hand Model R-103

This Remington Bullet knife, Model R-103, is new in the box, comes complete with original papers and box. The blades of this knife are made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass and the handles are made of Delrin imitation Bone. There are no cracks at any of the pins on both sides. Both blades sit deep and well centered. This knife is 3 1/2 inches long when closed and 6 1/4 inches long when the main blade is fully opened.

Frank Centofante Lock Back Folder with Engraved Bolsters

This is a beautiful Frank Centofante Lock Back Folder made in Tampa, FL. This knife is about 3 5/8 inches long when closed and about 6 1/2 inches long when the blade is opened. The blade is made of AST-34 stainless steel, a favorite of Frank. The bolsters are nickel silver and engraving by Bruce Shaw, a stunning example of a great folder by Centofante and engraving by Shaw. The handlers are Red Jigged, and there are no cracks at any of the pins on both sides. The knife has great walk and talk and the blade closes deep and well centered.

2000 Remington Bullet Knife R-1630 Navigator 1 Blade LockBack

This is a beautiful 2000 Remington Bullet Knife, model R-1630. The blade of this Bullet Knife consists of 440 stainless steel. This is a knife is a lockback. The blade is 4 inches long with a nail pull and traditional Remington UMC Made in the USA on the front side of the tang. The back of the tang has the model R-1630  and the year, 2000. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Jigged Delrin. There are no cracks at any of the pins on either side, a well made knife. This knife is manufactured and assembled by skilled American craftsmen right here in the USA.

2001 Remington Bullet Knife Mariner 1 Blade with Tortoise Shell Slip Joint

This is a beautiful 2001 Remington Bullet Knife, model R-1615T. The blade of this bullet consists of 440 stainless steel. The blade is 4 inches long with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-1615T and 2001 stamped on back of blade while the front of the tang has the traditional Remington UMC Made in the USA stamp. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Tortoise Shell Celluloid. There are no cracks at any of the pins on either side, a well made knife. 

 

2002 Remington Bullet Knife Apprentice 2 Blades with Tortoise Shell Slip Joint

This is a beautiful 2002 Remington Bullet Knife, model R-295T. The two blades of this bullet consists of 440 stainless steel. The main blade is 3 1/2 inches long with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has year 2002 while the front of the tang has the traditional Remington UMC Made in the USA stamp. The second blade has the traditional Remington UMC Made in the USA Stamp and on the reverse of the tang is the Model Number R-295T. The blades are tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Tortoise Shell Celluloid. There are no cracks at any of the pins on either side, a well made knife.

2003 Remington Bullet Knife Pioneer 2 Blades Slip Joint R-1178C

This is a beautiful 2003 Remington Bullet Knife with 2 blades, a slip joint knife Model R-1178C. The blades of this knife are made of stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handles are made of Cocobola Wood. This knife was manufactured and assembled by skilled American craftsman right here in the USA. There are no crack at any of the pins on both sides. This knife  is about 3 3/4 inches long when closed and about 6 3/8 inches when the main blade is opened. 

2004 Remington Bullet Knife Old Reliable with 2 Blades

This is a beautiful 2004 Remington Bullet Knife, Model R-103B, code name Old Reliable. The two blades of the R-103B are made of stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handles are made of Genuine Jig Bone. Like most Remington Cutlery, this knife was manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife a slip joint is about 3 3/8 inches long when closed and about 6 1/4 inches long when the main blade is fully opened. 

2005 Remington Bullet Knife The Maverick 2 Blades SlipJoint

This is a beautiful 2005 Remington Bullet Knife, the Maverick. The blades for the R-4353B are made of 440 stainless steel. The main blade has a nail  pull and traditional Remington trademark etch on the blade. The back of the tang has the pattern number R-4353B, the second blade has the year 2005 stamped on it while the front of the tang has the traditional Remington UMC Made in the USA stamp. Tempered to a Rockwell hardness of 56-59. The handles are made of Genuine Jig Bone with nickel silver bolsters and the liners are made of non-rusting brass. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife a slip joint is about 4 1/4 inches long when closed and about 7 1/4 inches long when the main blade is fully opened.

2006 Remington Bullet R1273B Trail Boss Slip Joint

This is a beautiful 2006 Remington Bullet knife model number R-1273B, comes complete with original papers and box. This is a two-blade Trail Bose with beautiful genuine Jig Bone Handle. On the main blade, front side is the word “Remington”. The main blade has a long pull. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners and bolsters are made of non-rusting brass. There are no cracks at any of the pins on both sides. This is a slip-joint, the front side of this knife has the Remington Bullet Shield. The blades sit deep and well centered. This knife is 5 1/48 inches long when closed and 9 1/2 inches long when the main blade is fully opened.

2007 Remington Bullet R1373 Renegade Folding Guard with Box and Papers

This is a beautiful 2007 Remington Bullet knife model number R1373, comes complete with original papers and box. This is a one-blade Renegade with beautiful jigged red handles and a folding guard. On the main blade, front side is the word “Remington”. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners and bolsters are made of non-rusting brass. There are no cracks at any of the pins on both sides. This is a lockback, the front side of this knife has the Remington Bullet Shield. The blade sits deep and well centered. This knife is 4 3/8 inches long when closed and 7 7/8 inches long when the main blade is fully opened. 

Italian 5 Blade Camp Knife Auto

This is beautiful Italian 5 blade auto. On the main blade, on the front side of the tang it says: Jaguer, Rostfrei. It has 3/16 Brazilian Horn Handles and Nickel Silver Bolsters and a large bail. On the end where the bail is located is a shot gun shell puller. Also includes a screwdriver and cap lifer, a saw, and a safety can opener. The blade sits deep and centered when closed. It fires strong when pushing the button. The sliding lock works in both positions. It has good snap and a tight lockup. There is no peeking or wobble when the blade is closed or open. This knife was originally sold from Crowley Knife Company in Minnesota.

2008 Remington Bullet Knife, The Veteran RB-473

This is a beautiful 2008 Remington Bullet Knife, The Veteran, Model RB473. It has beautiful Jigged Bone handles and is considered a Razor Barlow. The main blade is 2 1/2 inches long, the name Remington is etched on the front side of the blade. The smaller pen blade is 1 7/8 inches long and the year 2008 is stamped on the back side of the tang. Both blades sit deep and well centered when closed. The overall length of the knife is 3 1/2 inches. The blades are made of 440 Stainless Steel, with a long nail pull and traditional Remington etched the blade. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters are nickel silver.

2009 Remington Bullet Knife RB-1242 2 Blades Big Daddy Barlow

This is a beautiful 2009 Remington Bullet Knife folder, Model RB-1242 with 2 blades. It is called the Big Daddy Barlow. Both blades are made of 440 stainless steel for a superior, longer lasting razor sharp edge. The handles are made of genuine Saw Amber, no cracks, or chips. This knife is about 5 inches when closed and on the front bolster it has the Remington stamped. Both blades have hard snap and have never been sharpened. The Clip blade is the main blade and measures 4 inches long and has a long nail pull and the traditional Remington trademark etch on the blade. The back of the tang has the pattern number stamped while the front of the tang has the traditional Remington UMC Made in the USA stamp. The secondary blade is open blade that measures 2 1/2 inches long and has nail pull. Both blades are tempered to a Rockwell hardness of 56-59. The liners and the spring are made of non-rusting brass. Embedded in the handle is the legendary Bullet Shied.

2010 Remington Bullet Knife R-2253 2 Blades

This is a beautiful 2010 Remington Bullet Knife, R-2253 code name Double Strike. This year’s Bullet knife is a new pattern in the Bullet knife family. However, it is a very old European pattern called a Copperhead which has the same features as the popular trapper pattern. This year’s Bullet knife will prove to be highly collectable due to the unique pattern as well as new bone. The blades of the R-2253 consist of 440 high carbon stainless steel. The Clip blade is the main blade and measures 2 1/2 inches with a long nail pull and the traditional Remington trademark etch on the blade. The back of the tang has a pattern number stamped while the front of the tang has the traditional Remington UMC Made in the USA stamp. The secondary blade is a spey blade that measures 2 3/8 inches and has a long nail pull. Both blades are tempered to a Rockwell hardness of 56-59. The liners are made of quality brass and nickel silver bolsters. The handles bear a new jig pattern called “Tree Bark” and are dyed a rich mahogany for a classic look. This knife is manufactured and assembled by shilled American craftsman in the USA.

1997 Camillus & Remington Salutes NKCA Folder 2 Blades

This is a beautiful Remington Knife saluting the NKCA 1972-1997. The serial number is 0260. This knife has 2 blades made of 440 stainless steel. The main blade is 2 3/4 inches long with a nail pull and traditional Remington trademark etch on the blade and saluting the NKCA 1972 to 1997. On the front side of the tang it says Camillus, New York, USA. The back of the tang has nothing on it. The Spey blade is 2 3/4 stamped CCC-5 on the back side of the tang. On the front side of this knife is the NKCA Logo and on the back side is a gimp with the words Camillus. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Black Jigged Bone. 

2011 Remington Bullet Knife R1123L

This is a beautiful 2011 Remington Bullet Knife, model R-1123L. It has two blades and both are lock back. This knife is about 4 1/2 inches long when closed and about 8 inches when the main blade is opened. This knife is also called a Lock-Stock & Barrel and it has real jigged bone handles and nickel silver bolsters. Both blades sit deep and well centered.

2017 Remington Bullet Knife The Powderhorn 1 Blade SlipJoint

 This is a beautiful 2017 Remington Bullet Knife, the Powderhorn. The blade for the R-1613 is made of 440 stainless steel. The main blade has a nail  pull and traditional Remington trademark etch on the blade. The back of the tang has the pattern number R-1613 and the year 2017 stamped on it while the front of the tang has the traditional Remington UMC Made in the USA stamp. Tempered to a Rockwell hardness of 56-59. The handles are made of Genuine Chestnut Brown Sawcut Bone with nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A.

2016 Remington Bullet R-293B, The Boss, Two Blades, SlipJoint

This is a beautiful 2016 Remington Bullet Knife, model R-293B. The blades of this Bullet consists of 440 stainless steel. The main blade is 3 3/4 inch with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-293B while the front of the tang has the traditional Remington UMC Made in the USA stamp. The spey blade is 3 3/4 stamped 2016 on there back side of the tang. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Amber Jigged Bone. There are no cracks at any of the pins on either side, a well made knife. 

2015 Remington Bullet Knife The Cliffhanger with 2 Blades Model R-4466

This is a beautiful 2015 Remington Bullet Knife, a slip joint. The blades for the R-4466 knife are made of 440 stainless steel. Tempered to a Rockwell hardness of 56-59. The handles are made of Jigged Bone with nickel silver bolsters. This knife is manufactured and assembled by skilled American craftsman, right here in the U. S. A. This knife is about 3 3/4 inches long when closed and about 6 3/4 inches long when the main blade is fully opened. 

2014 Remington Bullet R-1173L LockBack

 This is a beautiful 2014 Remington Bullet Knife, model R-1173R. The blade of this Bullet consists of 440 stainless steel. The Clip blade is 2 3/4 inch with a nail pull and traditional Remington trademark etch on the blade. The back of the tang has pattern number R-11173L and 2014 stamped on back of blade while the front of the tang has the traditional Remington UMC Made in the USA stamp. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters of nickel silver. The handles are made of Amber Saw Cut Bone.

2013 Remington Bullet Knife

This is a beautiful 2013 Remington Bullet Knife, Model R-1303 “The Forester” a LockBack. This knife is 4 1/2 inches long when closed and 8 inches long when the blade is fully opened. The blade is made of 440 Stainless Steel, with a nail pull and traditional Remington etched the blade. The blade is tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass, the bolsters are nickel silver. The handles are made of Amber Bone saw cut.