Translate

Monday, September 7, 2015

Three Knife Men in Colorado

The profession of blade smith is generally a solitary one and the workshop is often built right in the middle of untamed nature as if to underline the fact. The extraordinary history of Timberline yet illustrates this apparently ancestral rule.

Jim Hardenbrook worked alone in his little workshop at Cortez. His constant search for perfection earning him a solid reputation throughout the whole state of Colorado. When Vaughan Neeley, a young man from the area, expressed a desire to learn the trade, he couldn’t have found a better master. In 1982, they formed a partnership, created Timberline Knives and set up their workshop in the San Juan Mountains. Situated high up, their chosen spot is not easily accessible in winter. The cabin in the middle of the forest is not very big, and there is no danger of any untimely visit, apart from the animals that inhabit the area. But that suited these two men just fine, which found there the tranquility and serenity that encourages energy and creativity. The adventure took yet another exciting turn when they were joined a few months later by a third man, Bill Sanders, already an established blade smith in his own right.


The circumstances were perfect for nurturing a strong friendship between them. First, they had to travel together the distance separating Mancos, where they lived. From their workshop with all the difficulties one might imagine. When it snowed, the only effective solution was to don snowshoes; then the entrance to the workshop had to be cleared with a shovel; finally, the wood fire had to be lit and kept going until the evening, and the return journey in the same epic conditions. How many times must they have been snowed in for several days and nights up there, unable to return to civilization.


Legend recounts that it is these exceptional circumstances that have favored the creation of their best models. The vast expanse of nature is certainly an incredible source of inspiration, but the danger is constant and drama frequent. In spite of being familiar with the area, Jim Hardenbrook fell to the bottom of a ravine during a storm.

Timberline Knives comprises the most beautiful and luxurious catalog of handmade American cutlery ever printed.  In a state where almost all of the inhabitants are hunters, the hunting range was of course the leading one with its mirror-polished blades giving superb cutting quality in any situation. Fishermen have not forgotten, no less than outdoorsmen, for whom as folding survival knife was specially developed: the handle plates can be taken off and the cavities have been designed to accept various accessories that one might need, such as compass, matches, fishing line and hook, etc. In each sheath there is even a small accessory that might serve as an arrowhead, as well as a flint for making fires.

After Jim Hardenbrook’s death in a hunting accident, the original Timberline split up to disappear into the mists and legends of the Rocky Mountains. The brand still exists, albeit with a “factory” as opposed to a “custom” manufacture.

Those knife collectors in the know very actively seek all of the models designed and produced during this first period in the little cabin in Colorado after. Indeed there are now probably more of these collectors than there are models.



Friday, August 14, 2015

Texas Toothpick


Like the single blade trapper, the fish knife is a folder pattern with a dual personality. It is either a single or double blade folder five inches long closed with a long, narrow clip blade and a powder horn-shaped handle. As with most other patterns of folder, both large and small versions of the fish knife have been produced but none have had the popularity if the five-inch. On two blade models, the second blade is normally a combination scalar or hook disgorger and bottle opener. Because fishing knives in general tend to be abused more than other forms of cutlery, fish knives have long been a popular item in cutlery economy lines.


The large size and low price led to the growth of the fish knife’s reputation. Under the name Texas Tickler, Tango Knife, Saturday Night Special, Dixie Switch and a few additional considered a tool of the street thug. Many hardware distributors actually made a point of selling the knife under two different names, depending on whether their market was sporting or urban.

On larger fish, such as salmon and steelhead, that are normally opened and iced down in the field for later steaking, the fish knife works as well as patter. Queen and Frost Cutlery, along with an occasional special run from Case and Blue Grass, are the primary sources for the fish knife folder.

Wednesday, August 5, 2015

The Liner Lock, a Seductive Alternative To The Traditional Switchblade



The principle of the primitive knife, that is to say a blade swiveling on an axis to fold into the handle, lasted for a long time: Jambette, Eustache, Capunchin. It can still be found in reproductions, just like the Corsican knife. The inconvenience of such a system is naturally the uncontrolled movement of the blade, since it is held firmly in neither an open nor a closed position. The fitting of collar on Nontron and Opinel knives, for example, is a safety feature that helps to avoid a major hazard, that of accidently closing the blade on one’s fingers during use. The discovery of the spring was a definite advance, since the blade could no longer swing open in one’s pocket. With the Laguiole it was the forced switchblade that was used. The contact parts including blade heel and spring are fitted in such away that one has to exert additional pressure on the blade to force it to close. The solution was the switchblade, made a specialty by Nogent in its time, with its characteristic ring placed on the back to ensure its release. Buck made the modern switchblade, with a button on the back of the handle, popular in 1963. In 1906, Cattaraugus had patented a linear switchblade system, but it didn’t take off.


It was only in 1980 that Michael Walker modernized this linear system to produce areal “one handed” version. The revolution consisted of placing a spring inside the plate, whose extremity would stop against the heel of the blade when open, keeping it firmly in that position. To close the blade the spring just had to be placed against the plate.



By fitting a protuberance on the blade where the thumbnail groove usually was, the blade could be opened and closed easily with the thumb of the hand holding the knife. Opening and closing a knife with just one hand became child’s play. The concept of the “liner lock” and “one handed” operation was born, and with great success.