Translate

Sunday, September 8, 2024

 Shaw-Liebowitz Knife depicting Moby Dick tangling with a ship. This was done between 1960-1984.

Monday, December 18, 2023

 Cattaraugus Cutlery Auto


The Cattaraugus Cutlery Company was  started in about 1882. in 1886 the Champlin family and relatives all worked at Cattaraugus. They stayed in business until 1963.

Sunday, December 3, 2023

 One Armed Knife by George Schrade


This knife has aluminum embossed handles and nickel silver bolsters and iron liners. The unusual curved blade with fork tines is designed for people with one good arm as a cutting and eating tool. On the front side of the tang it says “Press Button Knife Co, Walden, NY. There is nothing on the back side of the tang. This knife is about 4 5/8 inches when closed and about 8 3/4 inches when opened.




Friday, December 1, 2023

 FlyLock Letter Opener


This knife has orange celluloid handles with brass liners. It is a single blade stamped “Flylock”, then Reg US Pat Off. On the back side if the tang it reads Flylock Knife Co. B’Port, Conn”. This knife was made to open a letter.




Friday, August 18, 2023

 This is the famous Ka-Bar Grizzly with stag handles and brass liners and nickel silver bolsters. These knives are commonly referred to as the "Grizzlt". This knife has large blade and  is stamped KA-Bar and under it says USA. On the back side of the tang it says UNION CUT CO.


Thursday, July 6, 2023

Don Huffman Custom 2 Blade Knife with Jigged Bone Handles

 


This is a beautiful Don Huffman Custom folder with 2 blades. This knife has two blades made of AST-34 and nickel silver bolsters and liners. The serial number on this knife is 03. This knife is 3 ¾ inches long when closed and 6 ¾ inches long when the main blade is fully opened. Both blades sit deep and well centered when closed. The handles are jigged bone, not sure what type of bone it is. The walk and talk is perfect on this knife. The fit and finish on this knife is on par with anything that Jess Horn or Frank Centofante made.




Wednesday, November 23, 2022

This is a beautiful Case Auto, Model 5171L. It has Stag handles and Nickel silver bolsters. This knife is a release lever with brass liners. The blade is sabre ground clip and is stamped CASE over Tested XX. The back of the blade is stamped 5171L The bottom bolster is also stamped Case over Tested XX. This knife is about 5 3/8 inches when closed and about 9 1/4 inches long when opened.




 Here is a complete set of Schrade Knives playing cards. Includes 52 cards, two jokers, what makes Schrade a Great Knife and The Schrade Bill of Rights. Picked these up at Great Western when it was in business years ago.



Tuesday, February 15, 2022

George Schrade Auto Button in the Bolster Folding Guard

This is a beautiful and rare George Schrade with Button in the Bolster and folding guard. This knife is a auto made by George Schrade in 1895-1905 and the bolsters are nickel silver and iron liners. The model number is #1005. On the front of the blade is said: Press Button Knife Co., Walden, NY and on the back of the blade is blank. The knife is about 4 7/8 inches when closed and about 8 1/2 inches long when the blade is opened. When the blade is closed, it sits deep, and in the middle, no peeking. There is a lot of patina on this knife. The handles are jigged bone, and they are no cracks on both of the handles.



Friday, May 28, 2021

George Schrade Auto Button in the Bolster

This is a beautiful and rare George Schrade with Button in the Bolster. This knife is a Auto made by George Schrade in 1895-1910 and the bolsters are nickel silver and iron liners. The model number is #1000. On the front of the blade is said: Press Button Knife Co., Walden, NY and on the back of the blade is blank. The knife is about 4 7/8 inches when closed and about 8 3/4 when the blade is opened. This knife originally had etching on the front of the blade that says Invincible. It is not there anymore. When the blade is closed, it sits deep, and in the middle, no peeking. There is a lot of patina on this knife. The handles are jigged bone, and they are no cracks on both of the handles. 



Sunday, May 23, 2021

Frank Centofante (1936-2009) Damascus Bolsters Folder

This is a beautiful Frank Centofante Folder with Damascus Bolsters and Green Sea Snail handles. This knife is about 4 1/8 inches long when closed and about 7 1/4 inches long when the blade is opened. The blade is ATS-34 and Frank did beautiful file work on the liners both top and bottom. This knife is marked Madisonville,TN. The blade closes deep and well centered. 




Saturday, May 22, 2021

Frank Centofante Folder MOP Lock Back File Work

This is a beautiful Frank Centofante folder with mother-of-pearl handles. This knife, a lock back is about 3 3/4 inches long when closed and about 6 1/2 inches long when the blade is open. The mark on the blade is the third one from Frank, it says: Centofante, Madisonville, TN. The blade is made of ATS-34, a favorite of Frank. The bolsters are stainless steel and when the blade is closed, it centers well and deep. Frank did file work on the liners, both top and bottom. This is a special knife that Frank made for me, he was trying to make a knife that would not rip out my pant pockets. If you look closely at the main bolster, you can see the bump out. 



 

Frank Centofante (1936-2009) Interframe MOP

This is a beautiful Frank Centofante Interframe folder with Mother of Pearl inlays. The blade is ATS-34 and it has a satin finish. This knife is about 2 1/2 inches long when the blade is closed and about 5 7/8 inches long when the blade is opened. This knife, a lockback has nickel silver bolsters. The knife is marked Tampa, Florida. The bolsters are nickel silver and when the blade is closed, it centers well and deep. 





Friday, May 21, 2021

Frank Centofante (1936-2009) Side Lock Folder

This is a beautiful Frank Centofante Side Lock. The knife is about 3 1/2 inches long when closed and about 6 inches when the blade is opened. The blade is ATS-34 satin finish, includes stainless steel bolsters and back spring. It had beautiful dovetailed handle from the South China Sea. It has fancy filed stainless steel lines on top and bottom. This knife was made in Madisonville, TN. When the blade is closed, it centers well and deep. There are no cracks at any of the pins on either side.



Tuesday, May 18, 2021

Bowen Bullet Folder with Engraving on the Blade a Lockback

This is beautiful Bowen Bullet Knife made in Atlanta, Georgia. This knife model is R-1306 is a lockback and the handles are Jigged Bone. The blade has been engraved by “Dillingham” for America’s Bicentennial from 1776-1976. This knife is about 4 1/2 inches long when closed and about 8 inches long when opened. The bolsters are nickel silver with brass liners. On the front side, on the tang, it says Bowen USA and on the reverse side on the tang it says, R-1306. There are no cracks at any of the pins on both sides of the handles or the thong hole. The blade sits deep and well centered when closed, there is no wiggle. Comes complete with the original Bowen Box and wrap. 




Thursday, May 6, 2021

Italy INOY Auto has Bolster-Release Faux Mother of Pearl

This Italy auto was made after 1960 in which the bolster rotates to lift the backspacing off the blade stud to allow closing off the knife. This is also referred to as a “rotating bolster” or “swivel bolster”. This knife is about 5 inches long when closed and about 8 3/4 inches when the blade is open. The handles are faux MOP or Mother-of-Pearl. On the front side of the blade, on the tang it says: INOY and on the back side of the tang it says Paten 340386. There are no other marking on this knife. There are no cracks at any of the pins on both sides. The blade open up and fires strong when the button is pressed. It locks tight, no wobble. When closed, the blade sits in the middle with no peeking. The lock works in both positions. 



 

Wednesday, May 5, 2021

Italian Auto has Bolster-Release Blue Handles

This Italy auto was made after 1960 in which the bolster rotates to lift the backspacing off the blade stud to allow closing off the knife. This is also referred to as a “rotating bolster” or “swivel bolster”. This knife is about 5 inches long when closed and about 8 3/4 inches when the blade is open. The handles are Blue Plastic and on the front of the tang is says: Rostfrie. I think this knife was made by Frank Beltrame for export to Germany. There are no other marking on this knife. There are no cracks at any of the pins on both sides. The blade open up and fires strong when the button is pressed. It locks tight, no wobble. When closed, the blade sits in the middle with no peeking. The lock works in both positions.



Friday, April 2, 2021

Italian 5 Blade Camp Knife Auto

This is beautiful Italian 5 blade auto. On the main blade, on the front side of the tang it says: Jaguer, Rostfrei. It has 3/16 Brazilian Horn Handles and Nickel Silver Bolsters and a large bail. On the end where the bail is located is a shot gun shell puller. Also includes a screwdriver and cap lifer, a saw, and a safety can opener. The blade sits deep and centered when closed. It fires strong when pushing the button. The sliding lock works in both positions. It has good snap and a tight lockup. There is no peeking or wobble when the blade is closed or open. This knife was originally sold from Crowley Knife Company in Minnesota.




Thursday, March 25, 2021

Barry Wood (1925-2014) Pacific Cutlery Corp Knife with Box & Instructions

This is a beautiful Barry Wood Pacific Cutlery Corporation knife complete with an original box and instructions. The knife is about 3 3/4 inches long when closed and about 6 1/2 inches long when the blade is opened. The blade is made of 440-C Stainless Steel and is a spear point, and blade hardness is 57-59 Rockwell C. The handle material is 17-4-PH and the handle finish is Silicon Oxide Blasted. Inside the handles, on one side are the initials PCC, and inside the other handle is the Barry Wood Logo and US Patent 3702501. The box does show signs of lite shop wear. 




Monday, March 15, 2021

Barry Wood / Mike Irie Mark E-I / T-3, Folder

This is a beautiful Barry Wood / Mike Irie Mark E-I / T-3. The blade is made of ATS-34, the frame is 174PH Stainless and the handles are Dyed Maple Burl Stabilized. The blade is about 3 9/16 inches long and the knife is about 8 1/4 inches long when the blade is fully opened. The blade style is a Caper and it was made in June 1998. On front side of the knife blade is the Barry Wood logo. Also inside the handle is the serial number 069803, and the signature of Mike Irie and Barry Wood. Comes complete with a box and paper.