1986 Remington Bullet Knife R-1263 Hunter with Pen Blade

This is a beautiful 1986 Remington Bullet Knife R-1263, a Hunter with a Pen Blade. This knife is about 5 3/8 inches long when closed and 9 1/2 inches long when the blade is opened. This knife has Delrin handles and there are no crack on either side. 

2019 Queen Cutlery Winchester Toothpick Folder Slipjoint

 This is a beautiful Queen Cutlery Winchester Model .270 Cartridge Series Toothpick. This is considered new old stock and was produced by Queen Cutlery in 1993. The blade, stainless steel, is a Clip and about 4 inches long. The knife is about 5 inches long when closed. The main blade has the original Cartridge Series Etching and the back of the blade is etched with IKC 2019. The front side of the tang says: Winchester, Trade Mark, Made in USA. The back side of the tang says: 19102, 1993. There is an inlay Bullet Shield on the front side of the knife with “Winchester” on the Bullet Shield. The bolsters are nickel silver and the liners are non-rusting brass. The handle material is Burnt Orange Bone with a Winchester Jigging.

2017 IKC Case 1 Blade Folder

 This is a beautiful Case pattern number 61048CV. The single blade knife is about 4 1/8 inches long when closed. The blade is Chrome Vanadium Carbon Steel, a clip blade. The handles are dark jigged bone with nickel silver bolsters and a shield that is inlayed. IKC 2017 is stamped on the blade.

2016 IKC Queen Cutlery 2 Blade Barlow with Ebony Handles SlipJoint

This is a beautiful Queen Cutlery 2 Blade Barlow with Ebony Handles. This knife was made for IKC. The blades are CMP154 stainless and the liners are made of non-rusting brass. The main blade is a spear point and its about 2 1/2 inches long. The Wharncliffe blade is about 2 1/4 inches long. This knife is about 3.5 inches long when closed and about 6 1/8 inches long when the main blade is opened. This knife is a slipjoint and it has half stops. On the main blade, on the front side of the tang it has: The Queen Logo, DFC, USA, D2. Comes completes with a Queen box and wrap. 

2015 IKC Queen Cutlery Barlow 2 Blades Folder SlipJoint

This is a beautiful 2015 IKC Queen Cutlery Barlow with 2 Blades. The steel is D2 with a Satin Finish. All the blades are flat grind, the main blade, a Spear is about 2 5/8 inches long and the smaller blade, a Wharncliffe, is about 2 1/4 inches long. On the front side of the tang, on the main blade, there is: A Queen Logo, DFC, USA, D2. On the front side of the bolster are the letters IKC. This knife is about 3 1/2 inches long when closed and about 6 1/8 inches long when the main blade is opened. This knife has half-stops and it’s a slipjoint. The bolsters are Nickel Silver with a deep IKC etch and the liners are also Nickel Silver. The handles on this knife are ebony, comes with an original Queen Black Box and wrap.

2014 IKC Colonel Coon 2 Blade Folder SlipJoint

This is a beautiful Colonel Coon, 2 Blade, Double End Bolsters made in 2014. This knife is about 3 1/2 inches long when closed and about 6 3/8 inches long when the main blade is opened. The 2 blades of the knife are 420 stainless steel. The liners are non-rusting brass and the bolsters are nickel silver. On one handle of this knife are the words: IKnife Collector 2014. On the front side of the tang it says: Col Coon USA. The same is on the back side of the smaller blade. Both blades have half stops and both center well when closed, with no peeking. This knife was made by Queen Cutlery and the handles are Harvest Orange Smooth Bone. Only 50 knives were made in 2014.

2013 IKC Queen Cutlery Mountain Man LockBlade

This is a beautiful Queen Mountain Man knife. The blade is 1095 Carbon Steel, with a Satin Finish. The handles are Amber Carved Stag Bone, and a distinct vintage shied. On the front of the blade is the iKnifeCollector etch. This knife is about 4 1/2 inches when closed and about 8 inches when the blade is opened. On the front side of the tang there is a Queen Company Logo. 

2012 IKC Great Eastern Cutlery 3 Blade Whittler

This is a beautiful Great Eastern Cutlery 3 Blade Whittler. The handles of this knife are Pioneer Jigged Bone, the liners are non-rusting brass and the bolsters are nickel silver. The bolsters on this knife are pinched ever so slightly. This knife is about 3 1/2 inches long when closed and about 5 7/8 inches long when the main blade is opened. This knife is a slipjoint, with the master blade falls between the smaller two blades when closed. The blade for this knife is 1095, a good Carbon Steel. On the front side of the master blade are the words: UNXLD, IKC, 2012. This was the annual knife for IKnife Collector. On the front side of the tang it says: Northfield unXld, Made in USA. On the small blade, on the back side of the tang it says: Titusville Iron Works. On the other small blade on the front side of the tang is the pattern number 570312. Comes with the original tube, wrap and certificate of authenticity.

2011 IKC Great Eastern Cutlery 1 Blade

 This is a beautiful Tidioute Cutlery with a lanyard hole. The pattern number is 722111. The blade is made of 1095 steel and it is a Spear Blade. The handles are Indian Choffee Jig Bone and they is a round shield with IKC in it. Along with the knife, is a Certificate of Authenticity. This knife is about 3 7/8 inches long and about 6 7/8 inches long when the blade is opened.

2010 IKC Jumbo Swellcenter Sunfish Knife

This is a beautiful 2010 IKC Club Knife, a Jumbo Swellcenter Sunfish Knife. The original Jumbo Swellcenter pattern was invented by C. Platts & Sons Cutlery Company, Eldred, PA. Now, 100 years later, A G Russell has reintroduced this popular pattern for the IKC community. The handle is 4 5/8 inches long and a little over 1 1/2 inches wide. The blade is AUS10 and it is 3 3/8 inches long and about 1/4 inch thick. It has a round silver medallion shield etched IKC 2010. The handle material is an exotic wood called Monkey Thorn, a member of the Acasia family. This knife was made in China and A G Russell is not going to produce this knife with Monkey Thorn in order to keep the club knife unique to IKC.

 

1987 Remington Bullet Knife R-1613 Fisherman Toothpick

This is a beautiful 1987 Remington Bullet Knife R-1613, a Fisherman Toothpick. This knife is about 5 inches long when closed and 8 7/8 inches long when the blade is opened. This knife has Delrin handles and there are no crack on either side. There is no box or paper with this knife, my uncle was not into saving boxes end papers. The reflections on the blade and bolsters are from my camera, they are not on the knife.

1988 Remington Round Bullet Knife R-1615 Fisherman

 This is a beautiful Remington Round Bullet Knife, Model R-1615. The hand honed blade is made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. The liners are made of non-rusting brass. The handle is made of candy stripe celluloid. This knife was manufactured and assembled in the USA by skilled American craftsman. This knife, a slip joint, is about 5 inches long when closed and about 8 7/8 inches long when the blade is opened.

1989 Remington Bullet R1128 Knife Trapper with Box and Papers

This is a beautiful Remington Bullet knife model number R1128, comes complete with original papers and box. This is a two-blade Trapper with Cocobolo handles, has nickel silver bolsters and non-rusting brass liners. The blades are made of 440 stainless steel, tempered to a Rockwell hardness of 56-59. There are no cracks at any of the pins on both sides or the thong hole. Both blades sit deep and well centered. This knife is 4 1/2 inches long when closed and 7 7/8 inches long when the main blade is fully opened.